Polaroid 405 pack film holder
since: 2018/02/24
update: 2018/11/06
reference:
1. Polaroid #405 Pack Film Holder
2. How to use the Instant pack film holder (Polaroid 405)
3. Film Holders - 405 - 550 - 545i
4. A Guide to Using Polaroid Instant Pack Films
5. Instant Film Techniques with FUJIFILM - OnSet ep. 16
6. Recovering Fujifilm FP100C Negatives – Step-By-Step
---------------------------------------------------------------------------
重要:
1. 在步驟 6. Remove the safety cover 後, 步驟 7. Look for the white tab
即會看到白色標籤頁上面有數字 10, 代表目前還有 10 張.
2. 承上, 此時不可以再拉白色標籤頁了, 會讓底片位移.
3. 承上, 開始裝上相機, 對焦好後直接拉開豆腐刀即可按下快門曝光.
4. 承上, 接著才開始拉白色標籤頁, 此時黃色標籤頁會被引導出來.
5. 承上, 將黃色標籤頁拉出, 顯影開始計時.
6. 承上, 此時白色標籤頁上面的數字變成 9, 可以再拍下一張了
---------------------------------------------------------------------------
Fits all international standard 4x5 backs. Accepts Fuji 3-1/4" x 4-1/4" instant pack film. Provides 2.9x3.8" (7.4x9.7cm) images. They are used to check lighting exposure, composition and to evaluate color. The Polaroid Model 405 3.25 x 4.25" Pack Film Holder fits most 4 x 5 cameras and instruments with spring-backs or "locking-rib" backs. It adapts 4 x 5 camera systems to the smaller 3.25 x 4.25" Polaroid pack film format.
Film holder slides into the back of the camera
No alterations to equipment or focusing system is needed
Compatible with most 4 x 5 cameras and other equipment
No darkroom, electricity, running water, or chemical mixing required
Compatible with any equipment that uses conventional films
Saves time and money without compromising quality
Accepts all Fuji 3.25 x 4.25" instant pack films
High-quality instant photographs with minimum investment in additional equipment
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Back door latch 後門閂
White tab slot 白色標籤插槽
Yellow tab slot 黃色標籤插槽
Flexible dark slide 活動的暗匣
Developer rollers 顯影滾軸
Pack film framing template 包裝電影框架模板
(Compensates for off-center image with 4x5 cameras)
(用4x5相機補償偏離中心的圖像)
---------------------------------------------------------------------------
黑白底片:
Fujifilm FP-100B (Fuji PA-145, Fuji PA-45, Polaroid 550)
Fujifilm FP-400B
Fujifilm FP-3000B
彩色底片: Fujifilm FP-100C
---------------------------------------------------------------------------
---------------------------------------------------------------------------
update: 2018/11/06
reference:
1. Polaroid #405 Pack Film Holder
2. How to use the Instant pack film holder (Polaroid 405)
3. Film Holders - 405 - 550 - 545i
4. A Guide to Using Polaroid Instant Pack Films
5. Instant Film Techniques with FUJIFILM - OnSet ep. 16
6. Recovering Fujifilm FP100C Negatives – Step-By-Step
重要:
1. 在步驟 6. Remove the safety cover 後, 步驟 7. Look for the white tab
即會看到白色標籤頁上面有數字 10, 代表目前還有 10 張.
2. 承上, 此時不可以再拉白色標籤頁了, 會讓底片位移.
3. 承上, 開始裝上相機, 對焦好後直接拉開豆腐刀即可按下快門曝光.
4. 承上, 接著才開始拉白色標籤頁, 此時黃色標籤頁會被引導出來.
5. 承上, 將黃色標籤頁拉出, 顯影開始計時.
6. 承上, 此時白色標籤頁上面的數字變成 9, 可以再拍下一張了
---------------------------------------------------------------------------
Fits all international standard 4x5 backs. Accepts Fuji 3-1/4" x 4-1/4" instant pack film. Provides 2.9x3.8" (7.4x9.7cm) images. They are used to check lighting exposure, composition and to evaluate color. The Polaroid Model 405 3.25 x 4.25" Pack Film Holder fits most 4 x 5 cameras and instruments with spring-backs or "locking-rib" backs. It adapts 4 x 5 camera systems to the smaller 3.25 x 4.25" Polaroid pack film format.
---------------------------------------------------------------------------
White tab slot 白色標籤插槽
Yellow tab slot 黃色標籤插槽
Flexible dark slide 活動的暗匣
Developer rollers 顯影滾軸
Pack film framing template 包裝電影框架模板
(Compensates for off-center image with 4x5 cameras)
(用4x5相機補償偏離中心的圖像)
---------------------------------------------------------------------------
黑白底片:
Fujifilm FP-400B
Fujifilm FP-3000B
彩色底片: Fujifilm FP-100C
---------------------------------------------------------------------------
留言
張貼留言